Velodyne HD HDL-64E S2.1 Instrukcje Operacyjne Pobierz pdf (Strona 41)

R O

B L E

H O O

[ 38 ]

N G

and

’

Use this chart to troubleshoot common problems with the sensor. Use this chart to troubleshoot common problems with the sensor.

Unit doesn’t spin

Verify power connection and polarity.

Verify proper voltage

—

should be 16 volts

drawing about 3-4 amps.

Remove bottom cover and check inline 10 amp fuse.

Replace if necessary. Model No. ATM-10.

Unit spins but no data

Verify Ethernet wiring.

Verify packet output with another tool

(e.g. EthereallWireshark).

No serial communication

Verify RS-232 cable connection.

Unit must be active and spinning for

RS-232 update.

It may take several tries for the update

to be effective.

S E R V I C E A N D M A I N T E N A N C E

No service or maintenance requirements or procedures exist for the sensors. However, Velodyne does offer a preventative maintenance

service for a fee. For service maintenance, please contact Velodyne at (408) 465-2800, of log on to our website at www.velodynelidar.com.

1 2 ... 36 37 38 39 40 41 42 43

Brak uwag

Velodyne HD HDL-64E S2.1 Instrukcje Operacyjne Strona 41