Velodyne DIGITAL DRIVE - REV H Instrukcja Użytkownika Pobierz pdf (Strona 12)

www.velodyne.com

HDL-64E User’s Manual

se this chart to troubleshoot common problems with the HDL-64E.

Problem Resolution

Unit doesn’t spin Verify power connection and polarity.

Verify proper voltage – should be 12 volts

drawing about 3-4 amps.

Remove bottom cover and check inline fuse.

Replace if necessary.

Unit spins but no data Verify Ethernet wiring.

Verify packet output from another source

(e.g. Ethereal/Wireshark).

No serial communication Verify RS-232 cable connection.

Unit must be active and spinning for

RS-232 update.

It may take several tries for the update

to be ef

fective.

There are no user service or maintenance requirements or procedures for the Velodyne HDL-64E.

For service or maintenance, please contact Velodyne at (408) 465-2800, or log on to our

website at www

.velodyne.com/lidar

Troubleshooting

Service and Maintenance

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Brak uwag

Velodyne DIGITAL DRIVE - REV H Instrukcja Użytkownika Strona 12